Classification of Perth Skirting Boards

Skirting boards are a really elegant and decorative finish in a space that can really make a space come alive. They are basically there to cover the gap between the floor and the plaster and to avoid damage to the plaster from any effects. They secure the walls from regular knocks and scuffs and deliver a decent quality of durability and resistance.Feel free to visit their website at Perth Mdf Skirting Boards for more details.

Skirting boards were very large in days gone by, so much so that they were frequently cut into two parts to meet the height. However, the trend in skirting boards fashion has found a more of a happy medium in more recent years where 125 mm or 150 mm boards are now more prevalent. Deep skirtings in rooms with low ceilings do not look good either.

Skirting comes with a variety of fabrics, with soft and hardwood. Redwood in the cheaper timber range is very common but the higher expensive skirting boards would be made from solid oak. The key advantage of using Solid Oak Skirting boards is that it can easily withstand knocks and wear without scratching, denting or requiring repainting due to the Oaks inherent toughness.

Remove Old Skirting Boards

It’s pretty easy to cut the old skirting in place and you can do this with a hammer bolster chisel and crowbar. If you encounter a particularly stubborn skirting board piece, it could have been repaired with nails or screws, which would be difficult to detect on the skirting front as the heads are covered with filler. If you can locate the actual screws that hold the board in place, you could only remove the screws until the old boards are removed.


Until you repair your new skirting, the board will plan the boards that meet at the room corners. Most corners are intended to be square, so it follows that fitting skirting boards around such a corner, cutting the mitre can be 45 degrees, and pre-cutting mitre blocks can be purchased at this angle to assist the precise cutting of such regular cuts. Ideally though, skirting boards with mitres are better for cutting, as they offer better power.