There are two brackets, one for the idle part and the other for the chain working part (with a hexagonal hole) (with the round hole). This is where you’ll need someone else to make sure the brackets are symmetrically arranged and to hand you the equipment you’ll need. Drill holes after you’ve determined where you want the brackets to go and marked the location. Place the spring plunger into the hole of the idle side bracket before screwing the blinds brackets to the wall or frame. Visit this Tacoma faux wood blinds
The brackets can then be secured, and the roller blinds can then be attached. Make sure the idle side of the chain goes into the bracket with the hexagonal slot, and the chain side goes into the bracket with the hexagonal slot.A growing number of people are opting to get blinds installed on their home’s windows. When it comes to purchasing made-to-measure metal blinds, however, there are a few things to keep in mind to ensure that they suit properly. We give some advice in this article that you can find useful in ensuring that you properly measure the windows before purchasing your blinds.